UNDERGROUND LE GOLD (HYBRID SERIES) by MCM MODS UNDERGROUND v1 BLACK DELRIN (HYBRID SERIES) by MCM MODS
Our Price: $160.00
Our Price: $150.00
Underground Le Gold Hybrid Series Box Mod by MCM Mods Philippines UNDERGROUND v1 BLACK DELRIN (HYBRID SERIES) by MCM MODS

These Will Be In Stock Mid To Late August**********

These Underground Hybrid Series Box Mods Are Bad Ass! They Are Hard Hitting, Well Built, Compact Little Mod, They Are Like The Noisy Cricket On Steroids!!! A Must Have For Any Vaper!!! And Remember It's Not Safe To Fire Any Series Mod Below .3ohm So Be Careful, I Wouldn't Want You To Blow Yourself Up!!!

*series connection
*with battery adapter for single battery option
*hybrid 510 connector
*derlin/brass switch
*derlin body
*brass internals
*ss plates on each side
*serialized
*H73mm x W24mm x L50mm
*made in the Philippines

These Mods Can Be Set Up 3 Different Ways!!!

SERIES MODE WITHOUT HEAT SINK^^^
1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Unscrew your firing button and 510 hybrid atty adapter.
...
3. Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

4. FIRST, screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES BATTERY MODE WITH HEAT SINK
1. Unscrew your firing button and 510 hybrid atty adapter.
Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end....
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

2. Screw on your favorite atomizer in the heat sink.

3. Another easy one. Screw on the heat sink in the atty adapter.

4. FIRST, more screwing. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your favorite atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES MODE SINGLE BATTERY WITHOUT HEAT SINK

1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Insert battery and battery adapter. TAKE NOTE:...
Your battery adapter SHOULD ONLY be for your atomizer
Negative(-) end SHOULD ONLY be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

3. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
Place and screw the atty adapter on the battery hole with the battery adapter.

4. Place your atomizer and make sure the bottom pin connects to the battery adapter. Use the derlin spacer if there is a gap between.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.


***Please Note: As With All Hybrid Mods You Must Use A Tank Or RDA That Has A Protruding 510 Pin, This Is Very Important & It Can Be Very Dangerous If The 510 Pin Is Not Protruding! (Please See Photo Below)


These Underground Hybrid Series Box Mods Are Bad Ass! They Are Hard Hitting, Well Built, Compact Little Mod, They Are Like The Noisy Cricket On Steroids!!! A Must Have For Any Vaper!!! And Remember It's Not Safe To Fire Any Series Mod Below .3ohm So Be Careful, I Wouldn't Want You To Blow Yourself Up!!!

*series connection
*with battery adapter for single battery option
*hybrid 510 connector
*derlin/brass switch
*derlin body
*brass internals
*ss plates on each side
*serialized
*H73mm x W24mm x L50mm
*made in the Philippines

These Mods Can Be Set Up 3 Different Ways!!!

SERIES MODE WITHOUT HEAT SINK^^^
1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Unscrew your firing button and 510 hybrid atty adapter.
...
3. Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

4. FIRST, screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES BATTERY MODE WITH HEAT SINK
1. Unscrew your firing button and 510 hybrid atty adapter.
Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end....
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

2. Screw on your favorite atomizer in the heat sink.

3. Another easy one. Screw on the heat sink in the atty adapter.

4. FIRST, more screwing. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your favorite atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES MODE SINGLE BATTERY WITHOUT HEAT SINK

1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Insert battery and battery adapter. TAKE NOTE:...
Your battery adapter SHOULD ONLY be for your atomizer
Negative(-) end SHOULD ONLY be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

3. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
Place and screw the atty adapter on the battery hole with the battery adapter.

4. Place your atomizer and make sure the bottom pin connects to the battery adapter. Use the derlin spacer if there is a gap between.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

***Please Note: As With All Hybrid Mods You Must Use A Tank Or RDA That Has A Protruding 510 Pin, This Is Very Important & It Can Be Very Dangerous If The 510 Pin Is Not Protruding! (Please See Photo Below)
UNDERGROUND v1.5 (HYBRID SERIES) by MCM MODS (MATTE) UNDERGROUND v1.5 (HYBRID SERIES) by MCM MODS (SHINY)
Our Price: $150.00
Our Price: $150.00
UNDERGROUND v1.5 (HYBRID SERIES) by MCM MODS (MATTE) UNDERGROUND v1.5 (HYBRID SERIES) by MCM MODS (MATTE)

These Underground Hybrid Series Box Mods Are Bad Ass! They Are Hard Hitting, Well Built, Compact Little Mod, They Are Like The Noisy Cricket On Steroids!!! A Must Have For Any Vaper!!! And Remember It's Not Safe To Fire Any Series Mod Below .3ohm So Be Careful, I Wouldn't Want You To Blow Yourself Up!!!

*series connection
*with battery adapter for single battery option
*hybrid 510 connector
*derlin/brass switch
*derlin body
*brass internals
*ss plates on each side
*serialized
*H73mm x W24mm x L50mm
*made in the Philippines

These Mods Can Be Set Up 3 Different Ways!!!

SERIES MODE WITHOUT HEAT SINK^^^
1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Unscrew your firing button and 510 hybrid atty adapter.
...
3. Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

4. FIRST, screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES BATTERY MODE WITH HEAT SINK
1. Unscrew your firing button and 510 hybrid atty adapter.
Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end....
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

2. Screw on your favorite atomizer in the heat sink.

3. Another easy one. Screw on the heat sink in the atty adapter.

4. FIRST, more screwing. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your favorite atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES MODE SINGLE BATTERY WITHOUT HEAT SINK

1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Insert battery and battery adapter. TAKE NOTE:...
Your battery adapter SHOULD ONLY be for your atomizer
Negative(-) end SHOULD ONLY be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

3. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
Place and screw the atty adapter on the battery hole with the battery adapter.

4. Place your atomizer and make sure the bottom pin connects to the battery adapter. Use the derlin spacer if there is a gap between.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.


***Please Note: As With All Hybrid Mods You Must Use A Tank Or RDA That Has A Protruding 510 Pin, This Is Very Important & It Can Be Very Dangerous If The 510 Pin Is Not Protruding! (Please See Photo Below)

These Underground Hybrid Series Box Mods Are Bad Ass! They Are Hard Hitting, Well Built, Compact Little Mod, They Are Like The Noisy Cricket On Steroids!!! A Must Have For Any Vaper!!! And Remember It's Not Safe To Fire Any Series Mod Below .3ohm So Be Careful, I Wouldn't Want You To Blow Yourself Up!!!

*series connection
*with battery adapter for single battery option
*hybrid 510 connector
*derlin/brass switch
*derlin body
*brass internals
*ss plates on each side
*serialized
*H73mm x W24mm x L50mm
*made in the Philippines

These Mods Can Be Set Up 3 Different Ways!!!

SERIES MODE WITHOUT HEAT SINK^^^
1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Unscrew your firing button and 510 hybrid atty adapter.
...
3. Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

4. FIRST, screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES BATTERY MODE WITH HEAT SINK
1. Unscrew your firing button and 510 hybrid atty adapter.
Insert batteries. Highly recommended to follow this battery directions:
Positive(+) end should be for your atomizer adapter.
Negative(-) end should be for your firing button end....
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

2. Screw on your favorite atomizer in the heat sink.

3. Another easy one. Screw on the heat sink in the atty adapter.

4. FIRST, more screwing. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
SECOND, place and screw the atty adapter on your favorite atomizer, making sure the tip of the bottom positive pin slightly appears.
THIRD, screw your atty and adapter back in place.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

SERIES MODE SINGLE BATTERY WITHOUT HEAT SINK

1. Unpack your UGBox. It should includes the heat sink, derlin spacer and battery adapter.

2. Insert battery and battery adapter. TAKE NOTE:...
Your battery adapter SHOULD ONLY be for your atomizer
Negative(-) end SHOULD ONLY be for your firing button end.
***Please avoid to put batteries on the same end. It may cause your batteries to short and we do not want happening.***

3. Screw back the firing button in the battery hole with the negative end. Make sure its nice and tight.
Place and screw the atty adapter on the battery hole with the battery adapter.

4. Place your atomizer and make sure the bottom pin connects to the battery adapter. Use the derlin spacer if there is a gap between.

5. Test the firing button. Once tested, you can now enjoy and vape on.

WARNING: its a powerful little piece. Please vape with care.

***Please Note: As With All Hybrid Mods You Must Use A Tank Or RDA That Has A Protruding 510 Pin, This Is Very Important & It Can Be Very Dangerous If The 510 Pin Is Not Protruding! (Please See Photo Below)